Sunday, 24 June 2012

Getting Rid of Mold and Mildew in Your Home

Mildew is the term given to various mold and fungi accumulation. It usually grows on a flat and moist surface. It is usually found in bathtubs, showers, attic, basement, curtains, leather couches, window sills, and many more. It is a bad sign if you see growing molds in your home. It signifies that there is imbalance. Mildew may damage the surface where it is growing through decomposition and staining. It can also be harmful to the health due to the spores it builds. Do not withstand the fact that it is not pleasing to look at and can give a bad smell in the house. There are lots of reasons why you should eliminate mold and mildew in your house. Removing the mold and mildew should be your first step followed by repairing the damage done, and finally, keeping your home free from mold and mildew.

How to remove and control mold build up:

Mold can grow in winter and summer months. During winter, the air in the house is moist which can result to mold accumulation. On summer months, mold still grows because of the high humidity level. You should keep your home free from mold anytime of the month by doing preventive guidelines.
Clean your bathroom. Mold grows tremendously in bathrooms. One best substance to use in cleaning molds in the bathroom is the vinegar. Spray or sprinkle vinegar in areas that are more likely to accumulate molds. These areas include under your faucet, bathroom shower curtains, tile grouts in the floor, and walls near the sink. You can also mop your floor with water and vinegar.
Clean other parts of your home. Your kitchen is also another favorite spot of molds. Food leftovers, gloomy spaces in the cupboards, dirt and oil spills during and after cooking and moisture on the tile surface are all causes of molds in the kitchen. Spray your dish drier and chopping board with vinegar and anything that have contact with food. Do these regularly to prevent bacteria and mold build up.
Use air conditioner during summer when it is humid and hot outside. Humidity is one factor for growing molds. Dust mites also grow on humid season. It is said that 65% to 70% of humid is essential for a growing mold. Using air conditioner doe not only give you cool air but also prevents mold as well. Maintain a temperature of 30% to 50% to ensure that mold will not grow anywhere in your home.
During winter where it is very cold, mold may still develop. Again, maintain a temperature of 30% to 50%. You may use a dehumidifier if you have one at home.
Carpets may increase the risk of developing molds in your house because they are susceptible to dirt and moisture. It can also bring in fleas and dust mites. You can either take off your carpet to avoid these problems or clean it with baking soda regularly.

How to remove mildew:

Mold and mildew are quite the same and because of this, the method of preventing them is quite the same also.
Avoid moisture in your home. Extreme moisture can not only cause mildew, it can also damage your structure especially wood and drywall materials. To avoid too much moist in your home, fix leaking faucets or sink. Check your pipes if there are broken lines. Use air conditioners and dehumidifiers as needed. Maintain the right temperature all over the house including the basement and attic.
Remove anything that was damaged by mildew. If something has been infested by mildew, take it as a whole right away. If the damaged thing is not removed, the mildew will further develop. Be careful in removing the object to prevent you from inhaling the spores of the mildew.
Clean and dry the surfaces in the house. Ensure that every part of the house is clean most importantly the bathroom and the kitchen where moist and dirt are always present. After cleaning the whole house, dry the surfaces to avoid moisture. Ensure also that there is proper ventilation all over the house to maintain the right temperature all throughout the year.


Carpet Cleaning Watford, Carpet Cleaning Harrow, Carpet Cleaning Hampstead, Office Cleaning London, Cleaning Services London, source

No comments:

Post a Comment